Image may not exactly match the product.
Tripp Lite SMART3000CRMXL Smart Pro 3000VA UPS Backup 4U RM AVR 9 Out
- SKU:
- SMART3000CRMXL
- Shipping:
- $100.00 (Fixed Shipping Cost)
$3,081.32
$1,669.17
(You save
$1,412.15
)
Image may not exactly match the product.
Out of Stock.
Request a quote for re-stock information.
Done shopping? You can create a PDF of your cart for later or for your purchasing dept! Details at checkout.
Share:
3000VA UPS Compact 4U RM Smart Pro Line-Interactive 9 outlets 120V
This product is very heavy and normally ships on a pallet. Specific arrangements must be made with Hummingbird Networks to arrange delivery after order is submitted.
Key Features
- Tripp Lite's SmartPro Compact Rackmount Uninterruptible Power Supply (UPS) offers line interactive voltage regulation, network grade surge suppression and long lasting battery support for critical network hardware during blackouts and extended power failures
- Special reduced-depth housing, larger internal batteries, higher rated wattage and included 2 post rackmount installation hardware makes these systems ideal for network and telecom wiring closets and other limited-space installations
- Runtime is expandable with optional BP48V24-2U (limit 1), BP48V60RT-3U (multi-pack compatible) and BP48V27-2US (multi-pack compatible) external battery packs
- Some external battery configurations require the use of Tripp Lite's External Battery Configuration Software (see manual)
- SMART3000CRMXL 4U rackmount 3000VA/2880 watt UPS offers battery-derived sine wave AC output during power failures and extreme voltage variations
- Supports loading up to 3600 watts when hardwired
- Line interactive Automatic Voltage Regulation (AVR) provides two levels of voltage boost during brownouts and one level of voltage cut during overvoltage conditions to maintain regulated 120V nominal output over an input range of 83-145V
- Includes NEMA L5-30P input plug (hardwire line cord installation supported), L5-30R and 5-15/20R output receptacles
- Network management interfaces support simultaneous communications via USB port, DB9 serial port and optional SNMP/Web management accessory card slot
- Optional SNMPWEBCARD offers remote management and control of the UPS via direct network connection
- Additional ENVIROSENSE accessory, when used in conjunction with SNMPWEBCARD reports temperature, humidity and status of up to two directly connected contact closure sensors
- HID-compliant USB interface enables full integration with built-in power management and auto shutdown features of Windows and Mac OS X
- 97% efficiency in line power mode offers substantially lower operating costs than lower efficiency UPS types
- Supports detailed monitoring of equipment load levels, self-test data and utility power conditions via all 3 network interfaces at once
- Includes PowerAlert monitoring software with USB and serial cables
- Emergency Power Off (EPO) interface
- Integrated 3-bank programmable PDU switching supports load shedding and remote-reboot of up to 3 individual connected devices
- 3-stage metered current monitoring and battery charge status LEDs; Utility power and voltage regulation LEDs; Audible alarm; Self-test
- 2-post rackmount accessories included; 2-9USTAND tower stands and 4POSTRAILKIT 4 post rackmount kit available
- Field-replaceable, hot-swappable internal batteries and external battery packs
- Attractive all-black color scheme
Typical Applications
Special reduced-depth housing, larger internal batteries, higher rated wattage and included 2 post rackmount installation hardware makes these systems ideal for network and telecom wiring closets and other limited-space installations
Package Includes
- SmartPro Compact 4U Rackmount UPS system
- 2 post rackmount installation brackets
- USB and Serial Cabling
- Owner's manual information
| OUTPUT | |
| Output Volt Amp Capacity (VA) | 3000 |
| Output Watt Capacity (watts) | 2880 |
| Output Capacity Details | Supports 3600 watts max with hardwire input |
| Nominal Output Voltage(s) Supported | 120V |
| Frequency compatibility | 60 Hz |
| Output voltage regulation (line mode) | -18%, +8% |
| Built-in UPS output receptacles | 8 5-15/20R outlet(s); 1 L5-30R outlet(s) |
| Built-in controllable switched load banks | Three switchable single-outlet 5-15/20R load banks |
| Output circuit breaker | 20A (x2) - each 20A breaker protects 4 5-15/20R outlets / 30A breaker protects L5-30R |
| Output AC waveform (battery mode) | Pure Sine wave |
| INPUT | |
| Rated input current (at maximum load) | 24A (L5-30P input), 30A (hardwire) |
| Nominal Input Voltage(s) Supported | 120V AC |
| UPS input connection type | L5-30P; Hardwire |
| UPS Input cord length (ft.) | 10 ft. |
| UPS Input cord length (m) | 3.05 |
| Recommended Electrical Service | 120V 30A |
| Voltage compatibility (VAC) | 120 |
| Phase | Single-Phase |
| BATTERY | |
| Full load runtime (minutes) | 7.5 min. (2880w) |
| Half load runtime (minutes) | 19 min. (1440w) |
| External battery pack compatibility | BP48V24-2U (limit 1); BP48V48RT4U (multi-pack compatible); BP48V27-2US (multi-pack compatible) |
| DC system voltage (VDC) | 48 |
| Battery recharge rate (included batteries) | Less than 7.2 hours from 10% to 90% |
| Replacement battery cartridge (internal UPS battery replacement) | RBC94-2U (quantity 2) |
| Battery Access | Battery access door allows hot swap battery replacement without powering connected equipment off |
| VOLTAGE REGULATION | |
| Voltage regulation description | Automatic Voltage Regulation (AVR) circuits maintain clean, regulated computer-grade 120V nominal output, without using battery power, during brownouts to 83V and overvoltages to 145V |
| Overvoltage correction | Input voltages between 127 and 145V AC are reduced by 12% |
| Undervoltage correction | Input voltages between 96 and 108 are boosted by 12% |
| Severe undervoltage correction | Input voltages between 83 and 95 are boosted by 24% |
| LEDS ALARMS & SWITCHES | |
| LED Indicators | 5 LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status |
| Alarms | 3 function audible alarm indicates power failure conditions (4 short beeps every 10 seconds), overload (continuous short beeps) and low battery (continuous tone) |
| Switches | Yes, includes 2 front panel mounted push-button switches for system enable, self-test and alarm cancel functions. Back panel includes battery charge level switch for internal or external battery configurations |
| SURGE / NOISE SUPPRESSION | |
| UPS AC suppression joule rating | 570 joules |
| EMI / RFI AC noise suppression | Yes |
| AC suppression response time | Instantaneous |
| PHYSICAL | |
| Installation form factors supported with included accessories | 2 post 19 inch rackmount |
| Installation form factors supported with optional accessories | 4 post rackmount (4POSTRAILKIT); Tower (2-9USTAND) |
| Primary form factor | Rackmount |
| UPS / Power Module dimensions in primary form factor (height x width x depth / inches) | 7 x 17.3 x 16.8 |
| UPS / Power Module dimensions in primary form factor (height x width x depth / cm) | 17.8 x 43.9 x 42.7 |
| Rack Height | 4U |
| UPS / Power Module weight (lbs) | 102 |
| UPS / Power Module weight (kg) | 46.3 |
| UPS Shipping dimensions (height x width x depth / inches) | 13.2 x 23.6 x 22.8 |
| UPS Shipping dimensions (height x width x depth / cm) | 33.5 x 59.9 x 57.9 |
| Shipping weight (lbs) | 124 |
| Shipping weight (kg) | 56.3 |
| Cooling method | Fan |
| UPS housing material | Steel |
| ENVIRONMENTAL | |
| Operating Temperature Range | +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius |
| Storage Temperature Range | +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius |
| Relative Humidity | 0-95%, non-condensing |
| AC mode BTU / hr. (full load) | 408 |
| Battery mode BTU / hr. (full load) | 2149.5 |
| COMMUNICATIONS | |
| Communications interface | USB (HID enabled); DB9 Serial; EPO (emergency power off); Slot for SNMP/Web interface |
| WatchDog compatibility | Yes, compatible with Tripp Lite's Watchdog system service to restore operation to locked equipment through soft reboot of application / OS or hard power off/on reboot of connected equipment ideal for unattended kiosk applications |
| EPO port | Includes RJ11 EPO (emergency power off) port and interconnection cable |
| SNMP compatibility | Yes, includes slot for optional SNMPWEBCARD accessory (#SNMPWEBCARD) |
| Software and cabling included | Yes, includes PowerAlert software CD-ROM and complete cabling |
| LINE / BATTERY TRANSFER | |
| Transfer time | 5 ms. (typical) |
| Low voltage transfer to battery power (setpoint) | 83 |
| High voltage transfer to battery power (setpoint) | 145 |
| SPECIAL FEATURES | |
| Cold Start (startup in battery mode during a power failure) | Cold-start operation supported |
| High availability UPS features | Hot swappable internal UPS power module; hot-swap batteries |
| Appearance | Attractive black rackmount housing, optional use 2U black front bezel included to enable black color appearance |
| CERTIFICATIONS | |
| Certifications | Tested to UL1778 (USA), CSA (Canada), NOM (Mexico), Class A (Emissions) |
| WARRANTY | |
| Product Warranty Period (Worldwide) | 2-year warranty, 3 year with registration. Note: Registration is required for 3-year warranty. |
| Connected Equipment Insurance (U.S., Canada & Puerto Rico) | $250,000 Ultimate Lifetime Insurance |
Specs Overview
Detailed Specs
Related Products
