ADTRAN Transceiver Modules

Shop ADTRAN transceiver modules and direct attach cables for compatible NetVanta switches, routers, and business networking equipment. Hummingbird Networks offers ADTRAN SFP optical transceivers, SFP+ connectivity solutions, and DAC cables for Gigabit Ethernet, 10 Gigabit Ethernet, fiber uplinks, and short-distance network connections.

Whether you are expanding an ADTRAN NetVanta network, replacing an existing optical module, connecting switches between racks, or upgrading fiber connectivity, choosing the correct transceiver or cable is essential. Compare supported interface speeds, optical standards, fiber types, transmission distances, connector formats, and ADTRAN part numbers to identify a suitable solution for your network.

ADTRAN Transceiver Modules & DAC Cables

ADTRAN networking equipment uses pluggable transceivers and direct attach cables to support flexible connectivity between switches, routers, and other network devices. These components allow network administrators to select the physical connection required for a particular deployment rather than relying exclusively on fixed copper Ethernet ports.

Explore two primary product categories:

• ADTRAN SFP Transceivers: Pluggable optical modules for compatible fiber interfaces, including Gigabit Ethernet and higher-speed uplink applications.
• ADTRAN Direct Attach Cables: Preterminated copper cables designed for supported short-distance connections between compatible SFP+ ports.

Available options may include original ADTRAN products and separately identified ADTRAN-compatible connectivity products. Always review the individual product listing to confirm the manufacturer, supported equipment, and specifications.

ADTRAN SFP Transceivers

Small Form-factor Pluggable (SFP) transceivers provide removable optical connectivity for compatible network devices. They are commonly used to connect switches and routers across fiber optic cabling where standard twisted-pair Ethernet connections are unsuitable or insufficient.

ADTRAN SFP transceiver applications include:

• Fiber uplinks between network switches
• Connections between telecommunications closets
• Building-to-building network links
• Branch and campus network expansion
• Replacement of existing optical modules
• Connections to compatible fiber network equipment

Supported speeds and optical standards depend on the exact transceiver and host device.

ADTRAN Gigabit Ethernet SFP Modules

Gigabit Ethernet SFP modules provide 1 Gbps connectivity over supported fiber optic infrastructure. These modules are useful for networks that require optical uplinks between access switches, aggregation equipment, and routers.

Common optical standards include:

• 1000BASE-SX: Short-wavelength Gigabit Ethernet optics generally used with multimode fiber.
• 1000BASE-LX: Long-wavelength Gigabit Ethernet optics commonly used with single-mode fiber.

Hummingbird Networks also offers ADTRAN-compatible Gigabit optics identified by manufacturer-equivalent part numbers, including 1200480E1 and 1200481E1. Actual reach and compatibility must be checked against the individual module specifications.

ADTRAN 10G SFP+ Transceiver Modules

SFP+ transceivers support higher-speed network connections, including 10 Gigabit Ethernet on compatible ADTRAN equipment. They are commonly used for switch uplinks, aggregation connections, and higher-bandwidth network infrastructure.

Typical 10G optical applications include:

• 10 Gigabit switch uplinks
• Fiber backbone connections
• High-bandwidth aggregation
• Connections between network distribution points
• Network capacity upgrades

10GBASE-SR Transceivers

10GBASE-SR optics are designed for short-reach 10 Gigabit Ethernet connections over supported multimode fiber. They are commonly used inside buildings, telecommunications facilities, and data center environments.

10GBASE-LR Transceivers

10GBASE-LR optics are designed for longer-distance 10 Gigabit Ethernet connections over supported single-mode fiber.

Before choosing a 10G module, verify the switch or router's SFP+ interface, supported optical standard, fiber infrastructure, and required link distance.

ADTRAN Multimode Fiber Transceivers

Multimode fiber transceivers are commonly selected for shorter fiber links within buildings and network facilities. Depending on the optical standard, they can support Gigabit Ethernet or higher-speed connections.

Selection considerations include:

• Required Ethernet speed
• Multimode fiber grade
• Fiber cable length
• Operating wavelength
• Optical connector type
• Host-device compatibility

ADTRAN Single-Mode Fiber Transceivers

Single-mode fiber transceivers support optical links where longer distances or specific network designs require single-mode cabling.

These modules can be useful for:

• Connections between buildings
• Campus network backbones
• Remote telecommunications closets
• Distributed business locations
• Service-provider handoffs

Transmission distance depends on the exact module, optical budget, fiber characteristics, and installation conditions.

ADTRAN SFP+ Direct Attach Cables

Direct Attach Cables (DACs) provide short-distance network connectivity using preterminated copper cable assemblies with integrated pluggable connectors.

Unlike optical transceivers, a DAC typically connects compatible network ports without requiring separate optical modules and fiber patch cables.

ADTRAN SFP+ DAC applications include:

• Switch-to-switch connections
• Adjacent rack connectivity
• Short-distance 10G uplinks
• Network aggregation connections
• Equipment connections within a rack

Hummingbird Networks lists ADTRAN SFP+ direct attach cable products, including part number 1710484F1, a 1-meter cable for compatible network equipment.

ADTRAN DAC Cables vs. Optical Transceivers

DAC cables and optical transceivers serve related but different connectivity requirements.

Choose a DAC Cable When:

• Both devices support the appropriate direct attach interface
• The connection is relatively short
• The equipment is located in the same rack or nearby racks
• A preterminated copper connection is preferred

Choose Optical Transceivers When:

• The connection requires fiber optic cabling
• Devices are separated by greater distances
• Existing fiber infrastructure must be reused
• The network requires a particular optical standard
• Fiber isolation or cabling requirements favor optical connectivity

DAC and optical transceiver compatibility must be verified independently. An SFP+ port does not automatically support every available DAC or optical module.

ADTRAN NetVanta Transceiver Compatibility

ADTRAN NetVanta switches and selected routers use modular network interfaces for fiber connectivity and high-speed uplinks. The exact transceiver requirements vary by product family, model, and port type.

Relevant NetVanta switching families include:

• NetVanta 1500 Series and other installed-base switches
• NetVanta 1560 Series
• NetVanta 1570 Series
• NetVanta 1700 Series and compatible legacy models
• NetVanta 1760 Series

Different NetVanta models can provide SFP, SFP+, or other high-speed interfaces. Not every module or cable is supported by every switch.

Review the exact switch model, interface speed, ADTRAN compatibility documentation, and transceiver part number before purchasing.

ADTRAN Switch Fiber Uplinks

Fiber uplinks allow compatible ADTRAN switches to connect to upstream aggregation equipment or other network switches over optical cabling.

Fiber uplinks can support:

• Network backbone connectivity
• Connections between wiring closets
• Extended-distance Ethernet links
• Distribution and aggregation networks
• Network expansion
• Redundant uplink designs

For supported ADTRAN switching equipment, the appropriate module depends on the uplink port's speed, transceiver form factor, optical standard, and fiber type.

ADTRAN Router Transceiver Modules

Selected ADTRAN routers support modular optical or Ethernet connectivity. Compatible transceivers can provide additional flexibility when connecting business networks to fiber infrastructure or other network devices.

Before selecting a router transceiver, verify that the specific router has a supported pluggable interface. A router's standard Ethernet port cannot accept an SFP module without the appropriate hardware interface.

ADTRAN-Compatible Optical Transceivers

In addition to manufacturer-branded optics, Hummingbird Networks offers compatible transceiver products designed for selected ADTRAN networking equipment.

These products are identified separately from original ADTRAN-manufactured modules and can provide an additional sourcing option for supported network deployments.

Examples of ADTRAN-compatible optical module identifiers include:

• 1200480E1-HN: ADTRAN-compatible 1000BASE-SX multimode SFP.
• 1200481E1-HN: ADTRAN-compatible 1000BASE-LX single-mode SFP.
• 1200482G1-HN: ADTRAN-compatible 2.5G multimode SFP for supported equipment.

Compatibility should be verified against the exact host device and product listing. Original ADTRAN modules and third-party compatible modules may have different manufacturer warranties and support arrangements.

How to Choose an ADTRAN Transceiver Module

Choosing the correct optical transceiver involves more than matching the physical size of the module. Network performance and reliable operation depend on the full interface and fiber specification.

1. Verify the ADTRAN Device Model

Identify the exact NetVanta switch, router, or other network device. Confirm the port type and supported transceiver options.

2. Match the Interface Speed

Check whether the port requires 1G SFP, 10G SFP+, or another supported form factor. A physically similar module is not necessarily electrically or operationally compatible.

3. Choose Single-Mode or Multimode Fiber

Match the optical module to the installed fiber infrastructure. Single-mode and multimode transceivers are not interchangeable simply because their connectors fit.

4. Confirm the Transmission Distance

Review the required link distance and optical budget. Maximum reach varies by transceiver model, cable characteristics, connectors, and network conditions.

5. Check the Optical Standard

Verify the Ethernet standard, wavelength, and optical characteristics at both ends of the link.

6. Verify Connector Compatibility

Check whether the transceiver uses LC or another optical connector and whether the existing fiber patch cable matches.

7. Match the ADTRAN Part Number

When replacing an existing module, use the original part number as a starting point. Confirm whether the replacement is the exact manufacturer part or a separately identified compatible alternative.

8. Review Software and Firmware Requirements

Some network devices have software-dependent module support. Confirm compatibility with the installed operating system and firmware where applicable.

Choosing the Correct Fiber Optic Cable

An optical transceiver requires a compatible fiber optic cable and a corresponding interface at the opposite end of the connection.

Check:

• Single-mode or multimode fiber
• Required fiber grade
• LC or other connector format
• Duplex or supported single-fiber operation
• Fiber polarity
• Cable length
• Optical link budget

Common ADTRAN Transceiver Applications

Business Network Expansion

Add compatible fiber connections when expanding a network beyond the practical distance of conventional copper Ethernet cabling.

Switch Uplink Upgrades

Use supported optical modules or DACs to connect ADTRAN switches to higher-capacity network infrastructure.

Campus and Multi-Building Networks

Connect network equipment across existing fiber infrastructure using appropriate single-mode or multimode optics.

Network Equipment Replacement

Replace failed, damaged, or unsupported transceivers with properly matched modules for the existing ADTRAN device.

Network Closet and Rack Connectivity

Use short-distance DAC cables where supported to connect nearby network equipment without installing separate optical transceivers.

Installed-Base Maintenance

Source compatible modules and cables for existing NetVanta deployments where maintaining current network equipment is preferable to a complete infrastructure replacement.

ADTRAN Transceiver Replacement Checklist

Before ordering a replacement ADTRAN optical module or DAC cable, verify:

• ADTRAN equipment model
• Original module or cable part number
• SFP, SFP+, or other form factor
• Supported data rate
• Optical Ethernet standard
• Single-mode or multimode fiber
• Wavelength
• Required transmission distance
• Connector type
• Optical budget
• Device firmware compatibility
• Original manufacturer or compatible product preference
• DAC length and port compatibility, if applicable

Why Choose ADTRAN Transceiver Modules?

ADTRAN optical modules and supported connectivity accessories help organizations configure flexible network links for switching, routing, and communications infrastructure.

Depending on the equipment and selected module, benefits can include:

• Flexible optical uplink configurations
• Gigabit and 10 Gigabit Ethernet connectivity
• Support for compatible single-mode and multimode fiber
• Short-distance direct attach connectivity
• Network expansion without replacing entire switches
• Replacement options for installed NetVanta equipment
• Connectivity tailored to the physical network design

Why Buy ADTRAN Transceivers from Hummingbird Networks?

Hummingbird Networks helps businesses source ADTRAN networking equipment and compatible connectivity products for network upgrades, replacements, and infrastructure projects.

Our selection includes ADTRAN SFP transceivers, SFP+ connectivity accessories, direct attach cables, and separately branded compatible optical modules.

Customers can evaluate options based on exact ADTRAN part numbers, host-device compatibility, interface speeds, fiber requirements, and network topology.

For broader ADTRAN networking equipment, explore our ADTRAN product selection. For transceivers across multiple networking manufacturers, visit Transceiver Modules.

Frequently Asked Questions About ADTRAN Transceiver Modules

What is an ADTRAN transceiver module?

An ADTRAN transceiver module is a pluggable connectivity component used with supported ADTRAN networking equipment. Optical transceivers enable network devices to communicate over compatible fiber optic cabling.

What is an ADTRAN SFP module?

An SFP module is a compact, removable transceiver used for compatible network interfaces. ADTRAN SFP products can provide optical Ethernet connectivity on supported switches and routers.

What is the difference between SFP and SFP+?

SFP commonly refers to modules used for Gigabit Ethernet and certain other interfaces, while SFP+ is commonly used for 10 Gigabit Ethernet. Actual supported speeds depend on the host port and module.

Can I use any SFP module in an ADTRAN switch?

No. Physical fit does not guarantee compatibility. Verify the switch model, port speed, optical standard, firmware requirements, and supported transceiver part number.

What is the difference between 1000BASE-SX and 1000BASE-LX?

1000BASE-SX is generally used for short-distance Gigabit Ethernet over multimode fiber, while 1000BASE-LX is commonly used for longer-distance Gigabit Ethernet over single-mode fiber. Exact reach depends on the module and cabling.

Does ADTRAN support 10 Gigabit Ethernet transceivers?

Yes. Selected ADTRAN network devices support 10G SFP+ connectivity. Confirm support for the specific switch or router model.

What is an ADTRAN direct attach cable?

A direct attach cable is a preterminated cable assembly used to connect compatible networking ports over relatively short distances. SFP+ DACs are commonly used for supported 10G connections.

Is a DAC cable the same as a fiber optic transceiver?

No. A DAC uses an integrated cable assembly, typically copper, while an optical transceiver connects to separate fiber optic cabling. They serve different physical connectivity requirements.

Can I connect two ADTRAN switches with a DAC cable?

Yes, when both switches support the selected DAC type, interface speed, and cable configuration.

Can I use single-mode optics with multimode fiber?

Do not assume compatibility. The transceiver must be matched to the fiber type and optical requirements specified for the link.

How far can an ADTRAN SFP transceiver transmit?

Maximum transmission distance depends on the module's optical standard, fiber type, wavelength, optical budget, and installation conditions. Review the exact product specifications.

What is the difference between an ADTRAN original transceiver and an ADTRAN-compatible transceiver?

An original ADTRAN transceiver is supplied under the ADTRAN brand. An ADTRAN-compatible transceiver is manufactured or branded by another supplier for use with specified ADTRAN equipment. Compatibility and warranty terms should be reviewed for each product.

Does Hummingbird Networks offer ADTRAN-compatible optics?

Yes. Hummingbird Networks offers separately identified ADTRAN-compatible optical modules for supported equipment, including selected Gigabit Ethernet and other SFP applications.

What information do I need to replace an ADTRAN transceiver?

Provide the ADTRAN device model, existing transceiver part number, interface speed, fiber type, optical standard, and required connection distance.

Are ADTRAN SFP modules hot-swappable?

SFP modules are designed as pluggable components, but installation and removal procedures depend on the specific host device and operating requirements. Follow the manufacturer's instructions.

Can ADTRAN transceivers be used for building-to-building fiber connections?

Yes, when the network devices, fiber infrastructure, optical standards, and distance requirements are compatible. Outdoor pathways and electrical isolation requirements should also be considered.

How do I know whether I need an optical module or a DAC?

Use a compatible DAC for supported short-distance direct connections. Choose optical transceivers when the link requires fiber cabling, longer reach, or a specific optical interface.

Does Hummingbird Networks carry ADTRAN SFP and SFP+ connectivity products?

Hummingbird Networks lists ADTRAN NetVanta optical modules, SFP+ direct attach cables, and ADTRAN-compatible transceivers. Product availability and supported configurations vary.

Shop ADTRAN Transceiver Modules & DAC Cables

Build, expand, and maintain compatible ADTRAN network connections with SFP transceivers, SFP+ optical modules, and direct attach cables. Whether you need a Gigabit fiber uplink, a 10G network connection, a short-reach DAC, or a replacement module for existing NetVanta equipment, Hummingbird Networks can help you identify connectivity products that match your hardware and network requirements.