Image may not exactly match the product.

Cisco ASR 1000 Series Fixed Ethernet Line Card - Expansion Module - 10Gb Ethernet X 2 + 1000Base-T X 20 - For ASR 1001, 1002, 1002-F, 1002-X, 1002-X 10G, 1004, 1006, 1013 - ASR1000-2T+20X1GE

SKU:
ASR1000-2T+20X1GE
Shipping:
Calculated at Checkout
$55,595.60 $34,502.63
(You save $21,092.97 )

Image may not exactly match the product.

SPECIAL ORDER ONLY - THIS ITEM IS CURRENTLY AVAILABLE FOR PURCHASE, THOUGH THE ETA DEPENDS ON CISCO'S AVAILABILITY THROUGH DISTRIBUTION CHANNELS. FEEL FREE TO CONTACT US VIA PHONE, CHAT, OR SELECT "REQUEST A QUOTE" TO INQUIRE ABOUT AVAILABILITY.

Currently available for Pre-Order only

Check details for availability or request a quote

$55,595.60 $34,502.63
(You save $21,092.97 )
Availability:
This product is currently only available for pre-order

Condition:
New
Network Protocols:
10 Gigabit Ethernet
Device Type:
Expansion module
Product Line:
Cisco ASR 1000 Series
Connectivity Type:
Wired
Model:
Fixed Ethernet Line Card

Done shopping? You can create a PDF of your cart for later or for your purchasing dept! Details at checkout.

Share:
  • Carrier Ethernet, IEEE Standard 1588, SyncE (SyncE), and ITU-T Y.1731
  • Low price per port
  • Rich Ethernet Layer 2, Layer 3, IP, IPv6, and Multiprotocol Label Switching (MPLS) packet-processing capabilities as previously provided on Cisco ASR 1000 platforms
  • Ingress and egress QoS as previously provided on Cisco ASR 1000 platforms
  • Egress queuing capability as previously provided on Cisco ASR 1000 platforms
  • High- and low-priority lanes to Cisco ASR 1000 Series Embedded Services Processor (ESP) for high priority, low-latency forwarding

The Cisco ASR 1000 Series Fixed Ethernet Line Card is a fixed-port Ethernet line card for the Cisco ASR 1000 Series Aggregation Services Routers. The line card is capable of 40-Gbps full-duplex traffic forwarding using a fixed-port interface design. This line card has twenty 1 Gigabit Ethernet ports and two 10 Gigabit Ethernet ports.
The Small Form-Factor Pluggable (SFP) and 10-Gbps SFP (XFP) modules allow you to configure the line card for different media types and different optical requirements, as available. The line cards have one power LED, one line-card status LED, and 22 port or link-status LEDs.
The Cisco ASR 1000 Series Fixed Ethernet Line Cards have the twenty 1 Gigabit Ethernet and two 10 Gigabit Ethernet ports built in, allowing the Cisco ASR 1000 Series Routers to achieve greater Ethernet density and a lower price per port. The Ethernet line card takes the slot of the SIP with the twenty 1 Gigabit Ethernet and two 10 Gigabit Ethernet ports built in.

Specs Overview

Detailed Specs