Cisco Video Surveillance 2800 Series Standard Definition PTZ IP Camera - Network Surveillance Camera - CIVS-IPC-2830-RF

• Full range of motion
  The camera supports a continuous 360� pan rotation, 220� tilt angle range, and 12x optical zoom. The camera operator can remotely control the camera to track subjects or reposition the camera's field of view.
• Camera presets
  Operators can program up to 8 preset locations that the camera can automatically cycle through while recording.
• Wide dynamic range
  The camera employs powerful digital imaging technology, allowing it to capture high quality images in a wide variety of lighting conditions. It uses a progressive scan image sensor with global electronic shuttering to ensure natural color rendition, zero blooming and smear and minimal motion blurring.
• Outdoor ready
  The housing for the camera is IP66 rated, allowing for outdoor mounting without an additional enclosure.
• Day/night operation
  The camera provides true day/night functionality and includes an IR filter that automatically switches to night mode in low-light scenes. This function can be set to manual, automatic, or scheduled control.
• Flexible power options
  The camera supports Power over Ethernet (PoE+) 802.3at, High PoE, or 24 V AC power through an external power supply.

Cisco Video Surveillance 2800 Series Standard Definition PTZ IP Cameras are feature-rich cameras designed for superior performance, image quality, and ease of deployment. These cameras use a 1/4" Sony EX12E EXmor CCD Sensor that allows up to a 12x optical zoom while viewing and recording at D1 resolutions. The cameras are equipped with an integrated camera optics assembly which offers 360� continuous pan rotation, a 220� tilt range, and eight PTZ presets. In addition, the cameras support an SD/SDHC slot for local storage that can be used to store video if network connectivity is lost.
Cisco Video Surveillance 2800 Series IP Cameras support two simultaneous video streams. The streams can be compressed in MJPEG and H.264 formats across several resolution configurations, and can be configured in a variety of frame rates and bit rates for additional bandwidth administration. In addition, the cameras feature built-in motion detection and wide dynamic range (WDR) that enables the system to compensate in scenes where dramatic contrasts in lighting are present.
For unparalleled simplicity of setup and monitoring, the cameras support the Cisco Medianet interface. When connected to a Cisco switch that also supports Medianet, the switch recognizes the camera as a video endpoint and then uses SmartPort macros to set the right network parameters for the video stream on the network.