Tripp Lite 120V Inverter / Charger 750W For Utility/Work Truck 12VDC 2-NEMA 5-15R GFCI - DC To AC Power Inverter - AC 120/ DC 12 V - 750 Watt - UT750UL

• UT750UL serves as an automotive or stationary DC-to-AC inverter with automatic line to battery transfer and integrated battery charger
• Supports 120V AC output from a 120VAC line power source or 12VDC battery source
• 16.6 millisecond automatic transfer between line and battery power supports UPS protection during blackouts and voltage fluctuations for equipment compatible with a one cycle transfer time
• 750 watts continuous AC output in inverter mode, 2500 watts continuous AC output in AC mode
• Double boost inverter output supports momentary startup loads of up to 200% of the continuous rating for up to 10 seconds
• Protected hardwire bolt-down input lugs safely accept heavy gauge input wiring from attached battery bank
• Flanges and protected DC wiring terminals
• Moisture resistant construction enables vehicular operation in high humidity environments
• Set of four additional configuration dipswitches support 4 levels of charger limiting relative to output load size, a battery equalization program and battery charger low/high settings
• Resettable 10A charger AC input breaker and settable 12A AC output breaker and automatic 2 speed cooling fan protect the inverter from load and temperature related failures
• Grounding lug properly connects the inverter/charger system to earth ground or vehicle grounding system
• Automatic overload and thermal shutoff safely turns off inverter as excessive loads or overheating conditions develop
• Load sensing control dial enables adjustable load threshold required to automatically turn the inverter on and off in DC mode as load conditions change

Tripp Lite UT750UL utility work truck inverter/charger are the quiet alternative to gas generators with no fumes, fuel or noise. It provides equipment with utility or generator supplied AC electricity filtered through premium ISOBAR surge protection. This DC-to-AC inverter with automatic line to battery transfer and integrated charging system serves as an extended run UPS, a standalone power source or an automotive inverter suitable for rugged work site applications. Supplies up to 750 watts of continuous 120V AC power from any 12 DC battery or automotive DC source. When AC cable is connected to a live wall socket, commercial power passes through to connected equipment and the battery set is recharged via 3 stage selectable 11/45Amp charging system. In UPS mode, the APS system responds to blackouts and voltage fluctuations with a near instantaneous automatic transfer to battery derived AC output. A set of high current DC input terminals is included for simple installation. Reliable large transformer design, with frequency control, powers resistive electronic loads or large inductive motors, compressors and other devices with high current needs on startup. Included is the APSRM4 wired remote power switch with full status LED's, which provides remote power inverter on/off switching and continuous status information. The UT750UL supports an unlimited amount of runtime with any number of user-supplied batteries connected.