Image may not exactly match the product.

Tripp Lite PDUMH20AT PDU Metered 16 NEMA5-15/20R 20A

Calculated at Checkout
$754.42 $412.91
(You save $341.51 )

Image may not exactly match the product.


$754.42 $412.91
(You save $341.51 )
In Stock. Ships Same Business Day If Ordered Before 3pm PT

Warranty Information
2 Years

Done shopping? You can create a PDF of your cart for later or for your purchasing dept! Details at checkout.


Digital Power Distribution Unit Metered PDU 16 NEMA5-15/20R 20A



Key Features

  • 120V 20A Automatic Transfer Switch (ATS) / Metered PDU (Agency de-rated to 16A continuous)
  • Provides a redundant power option for critical networking equipment with a single input power cord
  • 2 digit display reports output power consumption in amps
  • 1U horizontal rackmount form factor; 14.5 in. / 36.8 cm depth
  • 16 built-in NEMA 5-15/20R outlets (8 front / 8 rear)
  • Set of two 12 ft. / 3.6m NEMA L5-20P input cables with set of two 5-20P adapters support connection to separate PRIMARY and SECONDARY inputs
  • ATS circuits normally maintain output sourced from the primary input cable; As primary input power fails or becomes unstable, the ATS will switch to maintain output sourced from the secondary input cable until power on the primary input is restored and stable
  • ATS configurations enable fault-tolerant, hot-swappable UPS protection when used with a single UPS and fully redundant UPS protection when each cord is connected to a separate UPS system (in a two-UPS environment, the primary input cable must be supported by an online UPS with zero transfer time similar to Tripp Lite SmartOnline series)
  • Advanced ATS configurations utilizing separate mains circuits, backup generators and even separate out of phase utility power grid feeds are fully supported
  • On-board ATS processor constantly evaluates power quality on both inputs to prevent transfer to the secondary source when unavailable or of lower quality than the primary source
  • Super-fast switchover between primary and secondary power sources occurs in 2-7 milliseconds
  • Built-in card slot supports optional SNMPWEBCARD for permanent upgrade to a switched & monitored PDU system
  • Outlets are factory programmed for sequential turn-on at 250 milliscond intervals when the PDU is first energized to prevent inrush-related equipment interaction on startup
  • Front panel LEDs confirm power availability on both input lines
  • TAA Compliant Version Available - Order Tripp Lite PDUMH20ATAA 

Typical Applications

  • Ideal means to provide single-corded network gear a redundant power option

Package Includes

  • PDU with attached L5-20P primary input cord
  • Detachable C19 to NEMA L5-20P secondary input cord
  • Set of two L5-20R to 5-20P plug adapters
  • 1U mounting brackets
  • User manual with warranty information
PDU Type Auto-Transfer Switch; Metered
Output Capacity Details 1.9kW (120V input), 2.0kW (127V input), 1.6kW (100V input);
20A maximum (Agency de-rated to 16A continuous)
Frequency compatibility 60 Hz
Output VA 2400
Output nominal voltage 100-127V nominal, single phase
Outlet quantity / type 16 NEMA 5-15/20R
Outlet Type NEMA 5-15R, NEMA 5-20R
PDU Input Voltage 100; 120; 127
Maximum Input Amps (A) 20
Maximum Input Amps (A) Details Agency de-rated to 16A maximum
PDU Plug Type NEMA 5-20P; NEMA L5-20P
Input cord length details Both input cables are 12 ft / 3.6m - the cables each terminate
to a L5-20P locking plug on the input side. Two included 6 inch
plug adapters convert the locking plugs to NEMA 5-20P plugs
Phase Single-Phase
Front panel LEDs 16 front panel LEDs display power on - off status for each
outlet, plus 2 LEDs for power status on each input line cord.
Digital Current Meter Display shows total load consumption
of connected equipment in amps
Shipping Dimensions (HWD/in) 6.25 x 22.5 x 23.5
Shipping Dimensions (HWD/cm) 15.9 x 57.2 x 59.7
Shipping weight (lbs) 16.4
Shipping weight (kg) 7.4
Unit Dimensions (HWD/in) 1.75 (1U) x 17.5 x 14.5
Unit Dimensions (HWD/cm) 4.44 x 44.4 x 36.8
Unit weight (lbs) 12.2
Unit weight (kg) 5.5
Material of construction Steel
Style Rackmount
Form factors supported 1U rackmount
PDU Form Factor Horizontal (1U, 2U, etc)
Relative Humidity Up to 95% (non-condensing)
SNMP compatibility Includes slot for optional SNMPWEBCARD accessory
to enable remote individual outlet control over IP
Appearance Black 1U rackmount steel chassis
TAA Compliant Option TAA Compliant Version Available - Order Tripp Lite PDUMH20ATAA
Certifications Tested to UL 60950 (USA, Canada), Class A (Emissions),
NOM (Mexico), RoHS Complaint
Product Warranty Period (Worldwide) 2-year limited warranty

Specs Overview

Detailed Specs