Image may not exactly match the product.

Tripp Lite SMART1000RM2U Smart Pro 1000VA UPS Backup RM/TWR AVR 6 Out

$99.00 (Fixed Shipping Cost)
$1,044.58 $571.72
(You save $472.86 )

Image may not exactly match the product.


$1,044.58 $571.72
(You save $472.86 )
In Stock. Ships Same Business Day If Ordered Before 3pm PT

Warranty Information
2 Years

Done shopping? You can create a PDF of your cart for later or for your purchasing dept! Details at checkout.


1000VA UPS Smart Pro Rack/Tower 2U Line-Interactive 6 outlet



Key Features

  • Tripp Lite SMART1000RM2U line interactive 2U rack/tower UPS with 1000VA / 1kVA / 800W capacity
  • Line interactive UPS with Automatic Voltage Regulation (AVR) corrects brownouts and overvoltages from 83 to 145V
  • NEMA 5-15P input plug; 6 NEMA 5-15R output receptacles, Two independently switchable output load banks
  • Maintains uninterrupted operation of connected networking equipment during blackouts, surges, brownouts and overvoltages
  • High 95% efficiency rating in line-power mode offers reduced power consumption and BTU emissions
  • Internal batteries offer 15 minutes at 50% load (400W) and 5.3 minutes at 100% load (800W)
  • Hot-swappable, user-replaceable internal batteries can be replaced with no disruption to connected equipment
  • Front panel LCD monitoring screen with MODE and ENTER buttons reports operating mode with 5-bar battery charge graphic, plus 7 selectable screens of detailed UPS and site power information
  • LCD interface also supports a number of advanced user setup and operating preferences
  • Ships with 4 post rackmount installation hardware; Optional 2POSTRMKITWM enables 2 post rackmount/wallmount installation; Optional 2-9USTAND enables tower placement
  • Built-in USB, RS-232 and optional SNMPWEBCARD accessory monitoring options
  • HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X
  • Included PowerAlert UPS monitoring software; Built-in Emergency Power Off (EPO) interface with cable

Package Includes

  • SMART1000RM2U UPS System
  • PowerAlert software with USB, Serial & EPO cabling
  • 4 post rackmount installation kit
  • Instruction manual
Output Volt Amp Capacity (VA) 1000
Output kVA capacity (kVA) 1
Output Watt Capacity (watts) 800
Output power factor 19:12
Nominal Output Voltage(s) Supported 120V
Frequency compatibility 60 Hz
Output voltage regulation (line mode) -21%, +8%
Output voltage regulation (Battery mode) +/- 5%
Built-in UPS output receptacles 6 5-15R outlet(s)
Built-in controllable switched load banks Two switchable two-outlet 5-15R load banks
Output AC waveform (AC mode) Sine wave
Output AC waveform (battery mode) Pure Sine wave
Rated input current (at maximum load) 9.2A
Nominal Input Voltage(s) Supported 120V AC
UPS input connection type 5-15P
Input circuit breaker 15A
UPS Input cord length (ft.) 10
UPS Input cord length (m) 3
Recommended Electrical Service 15A 120V
Phase Single-Phase
Full load runtime (minutes) 5.3 min. (800w)
Half load runtime (minutes) 15 min. (400w)
DC system voltage (VDC) 24
Battery recharge rate (included batteries) Less than 4 hours from 10% to 90%
Replacement battery cartridge
(internal UPS battery replacement)
See Tripp Lite UPS Replacement battery selector
Battery Access Front panel battery access door
Battery replacement description Hot-swappable, user replaceable batteries
Voltage regulation description Automatic voltage regulation (AVR) maintains line
power operation with an input voltage range of 83 to 147
Overvoltage correction Input voltages between 128 and 147 are reduced by 12%
Undervoltage correction Input voltages between 83 and 107 are boosted by 14%
Front panel LCD display Front panel LCD information and configuration screen
offers detailed UPS and site power status and operating
data, plus configuration of voltage, operating mode, alarm
function and a variety of additional options (see manual for
detailed LCD configuration and monitoring options)
Alarms Audible alarm indicates UPS startup, power-failure,
low-battery, overload, UPS fault and remote shutdown conditions
Alarm cancel operation Power-fail alarm can be temporarily silenced using
alarm-cancel switch; silent mode alarm configuration
option available
Switches 3 pushbutton switches control OFF / ON power status,
MODE selection and MUTE / ENTER control functions
UPS AC suppression joule rating 570
UPS AC suppression response time Instantaneous
EMI / RFI AC noise suppression Yes
Installation form factors supported
with included accessories
4 post 19 inch rackmount (mounting rail kit included)
Installation form factors supported
with optional accessories
2 post rackmount (2POSTRMKITWM);
Wallmount (2POSTRMKITWM); Tower (2-9USTAND)
Primary form factor Rackmount
UPS / Power Module dimensions
in primary form factor
(height x width x depth / inches)
3.5 x 17.5 x 12.5
UPS / Power Module dimensions
in primary form factor
(height x width x depth / cm)
8.9 x 44.4 x 31.75
Rack Height 2U
Secondary form factor Tower (requires 2-9USTAND)
UPS / Power Module weight (lbs) 35.4
UPS / Power Module weight (kg) 16.1
UPS Shipping dimensions
(height x width x depth / inches)
9 x 24 x 20.2
UPS Shipping dimensions
(height x width x depth / cm)
22.9 x 61 x 51.4
Shipping weight (lbs) 46.4
Shipping weight (kg) 21.1
Cooling method Fan
UPS housing material Steel
Operating Temperature Range +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius
Storage Temperature Range +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius
Relative Humidity 0 to 95%, non-condensing
AC mode BTU / hr. (full load) 13400%
AC mode efficiency rating (100% load) 95%
Communications interface USB; DB9 Serial; EPO (emergency power off);
Slot for SNMP/Web interface
Network monitoring port description Supports detailed monitoring of UPS and site power conditions
PowerAlert software Included
Communications cable USB and DB9 cabling included
WatchDog compatibility Supports Watchdog application, OS and
hard-reboot restart options for remote applications
Transfer time 4 milliseconds (AC to battery), 2 milliseconds (Battery to AC)
Low voltage transfer to battery power (setpoint) 83
High voltage transfer to battery power (setpoint) 147
Grounding lug Back panel grounding lug
Cold Start (startup in battery
mode during a power failure)
Cold-start operation supported
High availability UPS features Hot swappable batteries
Green & high efficiency features Individually controllable load banks
UPS Certifications Tested to UL1778 (USA); Tested to CSA (Canada);
Tested to NOM (Mexico); Meets FCC Part 15 Category B (EMI)
Product Warranty Period (Worldwide) 2-year warranty, 3 year with registration.
Note: Registration is required for 3-year warranty.
Connected Equipment Insurance
(U.S., Canada & Puerto Rico)
$250,000 Ultimate Lifetime Insurance

Specs Overview

Detailed Specs