Tripp Lite UPS Smart 500VA 300W Rackmount AVR 120V USB DB9 SNMP 1URM TAA - UPS (rack-mountable) - AC 120 V - 300 Watt - 500 VA - Output Connectors: 7 - 1U - TAA Compliant - SMART500RT1UTAA

• Federal trade agreements Act/TAA compliant for GSA schedule purchases
• Tripp Lite SMART500RT1UTAA: 5 KVA/500VA/300 watt line interactive UPS
• 1U rack/tower compatible form factor
• NEMA 5-15P input connection; 7 NEMA 5-15R output receptacles
• Installed depth of only 11.8 in/29.8 cm
• Large internal batteries offer runtimes of 14.6 minutes at half load (250VA/150 watts) and 3.2 minutes at full load (500VA/300 watts)
• Maintains regulated 120 V nominal output during brownouts as low as 90 V
• Includes 6 UPS-supported outlets and 1 surge-only outlet
• One of the UPS supported outlets is switched for remote load shedding or rebooting of an individual device
• PowerAlert UPS monitoring software enables detailed site power and UPS status updates with support for unattended shutdown of connected systems as UPS batteries become depleted
• Supports detailed monitoring of equipment load levels, self-test data, and utility power condition via built-in RS-232 and USB interfaces
• Emergency Power Off (EPO) interface with cable
• Multi-function audible alarms and set of 5 front panel LEDs
• Network-grade AC surge suppression
• Field-replaceable, hot-swappable internal UPS batteries

Tripp Lite's SMART500RT1UTAA intelligent, line-interactive rack/tower uninterruptible power supply prevents data loss, downtime and equipment damage due to power outages, voltage fluctuations and transient surges. Requires only one rack space (1U) in a 2 or 4 post rack, with included accessories for upright tower placement. Large internal batteries offer 14.6 minutes half load runtime and 3.2 minutes at full load. Maintains regulated 120V nominal output without using battery power during brownouts as low as 90V. 500VA/300 watt power handling capability is compatible with networking, telecom and other sensitive electronic applications. Includes 6 UPS supported outlets with a single outlet load bank that can be individually controlled via software interface to reboot select equipment on demand or shed less significant loads to extend battery runtime for more critical equipment. Includes 1 surge-only outlet for peripherals not requiring battery backup.
Supports simultaneous remote monitoring of UPS and site power conditions via built-in USB and DB9 monitoring ports. Includes PowerAlert UPS monitoring and unattended shutdown software with complete cabling. Built-in accessory slot supports SNMP with optional SNMPWEBCARD adapter. Emergency Power Off (EPO) interface offers option for instantaneous power-off of UPS and connected equipment in the case of fire or emergency situation. Multi-function audible alarms and set of 5 front panel LEDs offer at-a-glance notification of UPS and line power status. Network-grade AC surge suppression protects equipment from damage and performance problems resulting from transient surges and line noise. Attractive all-black color scheme.