Image may not exactly match the product.
Tripp Lite PDUMH15ATNET PDU Switched 8 NEMA 5-15R 15A & Web Card
- SKU:
- PDUMH15ATNET
- Shipping:
- Calculated at Checkout
$995.90
$545.08
(You save
$450.82
)
Image may not exactly match the product.
In-Stock
Done shopping? You can create a PDF of your cart for later or for your purchasing dept! Details at checkout.
Share:
Digital Power Distribution Unit PDU 8 NEMA 5-15R 15A & Web Card
Key Features
- 120V 15A Power Disrtibution Unit (PDU) with Auto-Transfer Switch (ATS) and Switched output receptacles (Agency de-rated to 12A continuous)
- ATS features provide redundant power for critical network equipment with a single input power cord
- Switched PDU features enable programmable or real-time power control of individual outlets via built-in network interface
- Visual meter reports output power consumption in amps
- 8 switched NEMA 5-15R outlets; 1U horizontal rackmount form factor; 14.5 in. / 36.8 cm depth
- Two NEMA 5-15P inputs connect to separate PRIMARY and SECONDARY power sources
- ATS normally maintains output sourced from the primary input; As primary input power fails or becomes unstable, the ATS will switch to power equipment from the secondary input until power on the primary input is restored and stable
- ATS configurations enable hot-swappable UPS protection when used with a single UPS and redundant UPS protection when each input is connected to a separate UPS system (in a two-UPS environment, the primary input cable must be supported by an online UPS similar to Tripp Lite SmartOnline)
- Advanced ATS configurations using separate mains circuits, backup generators and out of phase utility feeds are fully supported
- On-board processor evaluates power quality on both inputs to prevent transfer to the secondary source when unavailable or of lower quality than the primary source
- 2-7 millisecond transfer time between primary and secondary inputs
- DHCP/Manual configuration support; Supports HTTP, HTTPS, PowerAlert Network Management System, SMTP, SNMPv1, SNMPv2, Telnet, SSH, FTP, DHCP, BOOTP, NTP protocols
- Compatible with optional ENVIROSENSE temperature monitor
- Outlets are factory programmed for sequential turn-on at 250 millisecond intervals as the PDU is first energized
- Front panel LEDs confirm power availability on primary / secondary inputs and each output receptacle
- TAA Compliant Version Available - Order Tripp Lite PDUMH15ATNETAA
Typical Applications
- ATS PDU systems provide a redundant power option with individual outlet control for single-corded network devices
Package Includes
- PDU with attached 5-15P input power cord
- Detachable C13 to NEMA 5-15P 12 ft/3.6m secondary input cord
- Installable 1U mounting brackets
- User manuals with warranty information
| OVERVIEW | |
| PDU Type | Auto-Transfer Switch; Switched |
| OUTPUT | |
| Output Capacity Details | 1.4kW (120V input), 1.5kW (127V input), 1.2kW (100V input); 15A maximum (Agency de-rated to 12A continuous) |
| Frequency compatibility | 60 Hz |
| Output nominal voltage | 100-127V nominal, single phase |
| Outlet quantity / type | 8 NEMA 5-15R |
| Outlet Type | NEMA 5-15R |
| Customized load management receptacles | 8 individually controlled outlets |
| INPUT | |
| PDU Input Voltage | 100; 120; 127 |
| Maximum Input Amps (A) | 15 |
| Maximum Input Amps (A) Details | Agency de-rated to 12A continuous |
| PDU Plug Type | NEMA 5-15P |
| Input cord length (ft.) | 12 |
| Input cord length (m) | 3.66 |
| Phase | Single-Phase |
| LEDS ALARMS & SWITCHES | |
| Front panel LEDs | 10 front panel LEDs display power on - off status for each outlet, plus 2 LEDs for power status on each input line cord. Digital Current Meter display shows total output power consumption in amps. |
| PHYSICAL | |
| Shipping Dimensions (HWD/in) | 6.25 x 22.5 x 23.5 |
| Shipping Dimensions (HWD/cm) | 15.9 x 57.2 x 59.7 |
| Shipping weight (lbs) | 15.2 |
| Shipping weight (kg) | 6.9 |
| Unit Dimensions (HWD/in) | 1.75 (1U) x 17.5 x 14.5 |
| Unit Dimensions (HWD/cm) | 4.44 x 44.4 x 36.8 |
| Unit weight (lbs) | 11 |
| Unit weight (kg) | 5 |
| Material of construction | Steel |
| Style | Rackmount |
| Form factors supported | 1U rackmount |
| PDU Form Factor | Horizontal (1U, 2U, etc) |
| ENVIRONMENTAL | |
| Relative Humidity | Up to 95% (non-condensing) |
| COMMUNICATIONS | |
| SNMP compatibility | Yes, pre-installed SNMPWEBCARD provides remote monitoring via web, telnet, and SNMP management systems. Remote management gives user ability to turn connected loads on or off individually |
| SPECIAL FEATURES | |
| Appearance | Black 1U rackmount steel chassis |
| CERTIFICATIONS | |
| TAA Compliant Option | TAA Compliant Version Available - Order Tripp Lite PDUMH15ATNETAA |
| Certifications | Tested to UL 60950-1 (USA, Canada), Class A (Emissions), NOM (Mexico), RoHS compliant |
| WARRANTY | |
| Product Warranty Period (Worldwide) | 2-year limited warranty |
Specs Overview
Detailed Specs
Related Products
