Done shopping? You can create a PDF of your cart for later or for your purchasing dept! Details at checkout.
Share:
Digital Power Distribution Unit Metered PDU 8 NEMA5-15R 15A
Key Features
- 120V 15A Automatic Transfer Switch (ATS) / Metered PDU (Agency de-rated to 12A continuous)
- Provides a redundant power option for critical networking equipment with a single input power cord
- 2 digit display reports output power consumption in amps
- 1U horizontal rackmount form factor; 14.5 in. / 36.8 cm depth
- 8 built-in NEMA 5-15R outlets
- Set of two 12 ft. / 3.6m NEMA 5-15P input cables support connection to separate PRIMARY and SECONDARY power sources
- ATS circuits normally maintain output sourced from the primary input cable; As primary input power fails or becomes unstable, the ATS will switch to maintain output sourced from the secondary input cable until power on the primary input is restored and stable
- ATS configurations enable fault-tolerant, hot-swappable UPS protection when used with a single UPS and fully redundant UPS protection when each cord is connected to a separate UPS system (in a two-UPS environment, the primary input cable must be supported by an online UPS with zero transfer time similar to Tripp Lite SmartOnline series)
- Advanced ATS configurations utilizing separate mains circuits, backup generators and even separate out of phase utility power grid feeds are fully supported
- On-board ATS processor constantly evaluates power quality on both inputs to prevent transfer to the secondary source when unavailable or of lower quality than the primary source
- Super-fast switchover between primary and secondary power sources occurs in 2-7 milliseconds
- Built-in card slot supports optional SNMPWEBCARD for permanent upgrade to a switched & monitored PDU system
- Outlets are factory programmed for sequential turn-on at 250 milliscond intervals when the PDU is first energized to prevent inrush-related equipment interaction on startup
- Front panel LEDs confirm power availability on both input lines
- TAA Compliant Version Available - Order Tripp Lite PDUMH15ATAA
Typical Applications
- Ideal means to provide single-corded network gear a redundant power option
Package Includes
- PDU with attached 5-15P primary input cord
- Detachable C13 to NEMA 5-15P 12 ft / 3.6m secondary input cord
- 1U mounting brackets
- User manual with warranty information
OVERVIEW | |
PDU Type | Auto-Transfer Switch; Metered |
OUTPUT | |
Output Capacity Details | 1.4kW (120V input), 1.5kW (127V input), 1.2kW (100V input); 15A maximum (Agency de-rated to 12A continuous) |
Frequency compatibility | 60 Hz |
Output VA | 1800 |
Output nominal voltage | 100-127V nominal, single phase |
Outlet quantity / type | 8 NEMA 5-15R |
Outlet Type | NEMA 5-15R |
INPUT | |
PDU Input Voltage | 100; 120; 127 |
Maximum Input Amps (A) | 15 |
Maximum Input Amps (A) Details | Agency de-rated to 12A continuous |
PDU Plug Type | NEMA 5-15P |
Input cord length (ft.) | 12 |
Input cord length (m) | 3.66 |
Phase | Single-Phase |
LEDS ALARMS & SWITCHES | |
Front panel LEDs | 10 front panel LEDs display power on - off status for each outlet, plus 3 LEDs for power status on each input line cord. Digital Current Meter displays output power consumption in amps. |
PHYSICAL | |
Shipping Dimensions (HWD/in) | 6.25 x 22.5 x 23.5 |
Shipping Dimensions (HWD/cm) | 15.9 x 57.2 x 59.7 |
Shipping weight (lbs) | 15.2 |
Shipping weight (kg) | 6.9 |
Unit Dimensions (HWD/in) | 1.75 (1U) x 17.5 x 14.5 |
Unit Dimensions (HWD/cm) | 4.44 x 44.4 x 36.8 |
Unit weight (lbs) | 11 |
Unit weight (kg) | 5 |
Material of construction | Steel |
Style | Rackmount |
Form factors supported | 1U rackmount |
PDU Form Factor | Horizontal (1U, 2U, etc) |
ENVIRONMENTAL | |
Relative Humidity | Up to 95% (non-condensing) |
COMMUNICATIONS | |
SNMP compatibility | Includes slot for optional SNMPWEBCARD accessory to enable remote individual outlet control over IP |
SPECIAL FEATURES | |
Appearance | Black 1U rackmount steel chassis |
CERTIFICATIONS | |
TAA Compliant Option | TAA Compliant Version Available - Order Tripp Lite PDUMH15ATAA |
Certifications | Tested to UL 60950-1 (USA), CSA (Canada), Class A (Emissions), NOM (Mexico), RoHS compliant |
WARRANTY | |
Product Warranty Period (Worldwide) | 2-year limited warranty |