Articles

Meraki MS Switch Review for Growing IT Teams

Julia Ciarlone Julia Ciarlone
7 minute read

Table of Contents

A switch refresh can turn into a high-risk purchase fast. Choose too little PoE capacity, the next camera rollout stalls. Miss a license term or compatible optic, and a simple deployment becomes a last-minute escalation. This Meraki MS switch review looks at where Cisco Meraki switches make life easier for lean IT teams, where they require more planning, and how to decide whether they fit your environment.

Meraki MS switches are managed through the Meraki cloud dashboard rather than a traditional command-line interface. That changes the daily operating model. For organizations supporting a few sites with a small team, the appeal is less time spent logging into individual switches and more time spent solving business problems.

What Meraki MS switches do well

The strongest case for the MS family is operational consistency. A network admin can see switch health, connected clients, ports, power usage, and configuration status from one dashboard. Templates help standardize settings across locations, which matters when a retail chain, professional-services firm, or manufacturer has more sites than network specialists.

Configuration is also easier to delegate safely. Port profiles can apply VLAN, voice, access, and security settings consistently without asking every technician to build a port configuration from scratch. That reduces the chance that a new desk phone, wireless access point, or security camera lands on the wrong network.

Remote troubleshooting is another practical advantage. Administrators can inspect a port, run cable tests on supported models, cycle power to a PoE device, and identify clients without dispatching someone to a wiring closet for every issue. For an MSP, those capabilities can reduce truck rolls. For an internal IT team, they can shorten the path from "the conference room Wi-Fi is down" to a useful diagnosis.

Meraki also handles firmware management in a more guided way than many traditional switch platforms. Updates can be scheduled through the dashboard, with visibility into the network devices affected. That does not eliminate the need for a maintenance window or change control, but it makes staying current more manageable.

Meraki MS switch review: management versus control

Cloud management is a benefit only if it aligns with how your organization operates. The dashboard is intuitive, and most common switch tasks are quick to complete. But teams that depend on detailed CLI workflows, highly customized configurations, or tightly controlled air-gapped environments may find the model limiting.

Meraki does offer local status access for basic troubleshooting, but it is not designed to replace the traditional switch CLI experience. The platform intentionally favors standardization and dashboard-driven administration. That is a good trade for many 100- to 250-employee organizations. It is less compelling for environments where engineers need extensive low-level control on every device.

Internet dependence also deserves an honest discussion. An MS switch continues forwarding traffic using its existing configuration if its cloud connection is interrupted. Your users do not lose network connectivity simply because the dashboard is temporarily unavailable. However, visibility, cloud-managed changes, and some troubleshooting functions depend on dashboard access. Sites with unreliable WAN connectivity should account for that operational constraint.

Performance and hardware options

The Meraki MS switch portfolio covers compact switches for small spaces, access-layer models for user and device connectivity, and higher-capacity aggregation options. The right choice depends on the traffic and power requirements at the edge, not just the number of ports.

For a typical office, the decision usually starts with port count, PoE budget, uplink speed, and physical layout. A 48-port PoE switch may appear to leave plenty of room, but the wattage requirement can become the real limit once access points, cameras, phones, and specialty devices are connected. Calculate the power draw of current endpoints and leave room for growth.

Multi-gigabit ports are worth considering when deploying newer Wi-Fi access points. A high-performance AP connected to a 1 GbE access port can become constrained before the wireless design reaches its potential. That does not mean every port needs multi-gigabit capability. It means the ports serving APs, high-demand workstations, or imaging systems should match the intended workload.

Uplinks matter just as much. Access switches with 10 GbE uplinks may be adequate for a modest office, while a busy manufacturing site or multi-floor environment may need more headroom at the distribution layer. Fiber type, transceiver compatibility, and available aggregation ports should be validated before equipment is ordered.

Licensing is part of the switch cost

Meraki licensing is the issue that deserves the most attention during budgeting. An MS switch requires an active license to remain fully managed through the dashboard. Hardware price alone is not the project price.

License terms can vary, and organizations should align renewal timing with their budgeting cycle and expected hardware life. A longer term may simplify annual administration, while a shorter term may fit organizations with more variable plans. The best choice depends on cash flow, refresh strategy, and whether other Meraki products are already managed under the same organization.

Do not treat licensing as an afterthought. Confirm the license type, quantity, term, and co-termination approach before issuing a purchase order. This is especially important when adding switches to an existing Meraki environment, where the new licensing can affect the organization-wide renewal date.

Where Meraki MS is a strong fit

Meraki MS is well suited to teams that need predictable operations more than deep platform customization. It is particularly practical when IT is responsible for multiple branch offices, distributed retail locations, or a mix of wired users, wireless access points, cameras, and phones.

It also makes sense when the network needs to be manageable by more than one person. Clear dashboard visibility and reusable configuration standards reduce the risk that critical knowledge sits with a single engineer. That is valuable when an IT manager is balancing infrastructure, security, user support, and vendor coordination.

The platform is less natural for organizations with strict on-premises-only management requirements, no tolerance for recurring licenses, or a network design that requires complex features outside the Meraki operating model. In those cases, a Cisco Catalyst-based design or another traditional switching platform may offer a better technical and financial fit.

Questions to answer before you buy

A good switch quote should reflect the whole deployment, not just a model number. Before selecting Meraki MS hardware, establish the following:

  • How many active ports are needed today, and how many are expected over the next three to five years?
  • Which endpoints require PoE, and what is the total power budget with growth included?
  • Do access points or high-demand devices need multi-gigabit connections?
  • What uplink speeds, fiber types, and transceivers are required between closets and the core?
  • How will licensing align with the existing Meraki organization and renewal schedule?
  • Does the design need redundant power, stacking, or a spare switch for critical locations?

Those answers protect against common ordering errors: an underpowered PoE model, missing optics, insufficient uplinks, or a license that does not match the deployment plan.

A practical buying approach

Start with a simple port-and-power inventory by closet or site. Include users, phones, cameras, access points, printers, building systems, and anything expected to arrive in the next refresh cycle. Then map those needs to switch models and uplinks rather than selecting hardware based on port count alone.

Next, validate the full bill of materials. That should include switches, licenses, power supplies where applicable, stacking accessories, rack hardware, fiber modules, and patching assumptions. For multisite deployments, confirm whether a standardized model improves sparing and simplifies support, even if one location could technically use a smaller switch.

Hummingbird Networks has spent more than 20 years helping IT teams validate Cisco and Meraki configurations before equipment is ordered. A technical review can catch compatibility and licensing issues while there is still time to correct them, not after a project date is on the calendar.

Before you commit to a Meraki MS design, get a quote that shows the complete configuration and have the assumptions checked by someone who understands both the hardware and the deployment. A few minutes of validation is far cheaper than explaining why the new network cannot power the devices it was purchased to support.

FAQs

Are Meraki MS switches good for businesses?

Meraki MS switches are a strong option for businesses that need centralized cloud management, simplified troubleshooting, and consistent network configurations across locations.

Do Meraki MS switches require a license?

Yes, Meraki MS switches require appropriate licensing for continued cloud management and access to supported platform features.

« Back to Articles