Image may not exactly match the product.

Tripp Lite SMART1500SLT Smart Pro 1500VA UPS Backup TWR AVR 8 Outlet

Calculated at Checkout
$1,010.00 $472.06
(You save $537.94 )

Image may not exactly match the product.


$1,010.00 $472.06
(You save $537.94 )
In Stock. Ships Same Business Day If Ordered Before 3pm PT

Warranty Information
2 Years

Done shopping? You can create a PDF of your cart for later or for your purchasing dept! Details at checkout.


1500VA UPS Smart Pro Tower Line-Interactive 8 outlet w/ SNMP Slot



Key Features

  • SMART 1500SLT line-interactive UPS offers battery derived sine wave AC output during power outages, voltage regulation during brownouts and overvoltages, plus network-grade AC surge suppression
  • 1500VA/900 watt power handling capability with full-time sine wave output offers guaranteed compatibility with networking, telecom and other sensitive electronic devices
  • Large internal batteries offer runtimes of 17 minutes at half load (750VA/450 watts) and 6 minutes at full load (1500VA/900 watts)
  • Automatic Voltage Regulation (AVR) circuits maintain user-selectable 100, 110, 120 or 127V nominal output over an input voltage range of 91 to 145V
  • Includes 8 fully-protected NEMA 5-15R output receptacles arranged in a single load bank that can be powered off and back on again via software interface
  • PowerAlert UPS monitoring and unattended shutdown software enables configurable network broadcast messaging, pager & email notification, event logging and running user-defined script commands
  • Offers simultaneous monitoring by up to 3 directly-connected devices through included USB, DB9 and SNMP* interfaces (*requires optional SNMPWEBCARD), or the monitoring of any number of additional UPS systems over IP with included PowerAlert monitoring software.
  • Communications ports support messaging of UPS and line power status, including on-battery, low-battery, power restored, AC line voltage, DC battery voltage and remaining battery capacity
  • Supports timed inverter shutoff after unattended shutdown, activate self-test and UPS output power control for scheduled or immediate reboot of connected equipment
  • Supports Tripp Lite's WatchDog software application to restore unresponsive programs by systematically restarting applications, operating systems and ultimately rebooting completely locked computers by momentarily switching UPS power off and back on again (requires optional WATCHDOGSW)
  • LEDs offer continuous detailed status information of UPS operating parameters and site power quality
  • Hot-swappable batteries allow on-site battery replacement without powering off connected equipment

Package Includes

  • SMART 1500SLT UPS System
  • PowerAlert Software CD-Rom
  • USB and serial cabling
Output Volt Amp Capacity (VA) 1500
Output kVA capacity (kVA) 1.5
Output Watt Capacity (watts) 900
Output power factor 14:24
Nominal Output Voltage(s) Supported 100V; 110V; 120V
Nominal Voltage details 120V default (voltage selection via back panel switches)
Frequency compatibility 50 / 60 Hz
Output voltage regulation (line mode) -13%, + 15%
Output voltage regulation (Battery mode) +/- 5%
Built-in UPS output receptacles 8 5-15R outlet(s)
Output AC waveform (AC mode) Sine wave
Output AC waveform (battery mode) Pure Sine wave
Rated input current (at maximum load) 10.1A (100V), 9.3A (110V), 8.6A (120V)
Nominal Input Voltage(s) Supported 100V AC; 110V AC; 120V AC
UPS input connection type 5-15P
UPS Input cord length (ft.) 6
UPS Input cord length (m) 1.8
Recommended Electrical Service 15A 120V
Phase Single-Phase
Full load runtime (minutes) 8 min. (900w)
Half load runtime (minutes) 20 min. (450w)
DC system voltage (VDC) 36
Battery recharge rate (included batteries) Less than 8 hours from 10% to 90%
Replacement battery cartridge
(internal UPS battery replacement)
Battery Access Battery access door
Battery replacement description Hot-swappable, user replaceable batteries
Voltage regulation description Automatic voltage regulation (AVR) maintains line power
operation with an input voltage range of 95 to 145 (120v),
87 to 133 (110v), 83 to 121 (100v)
Overvoltage correction Voltage reduction of 12% applies when input is
127 to 145 (120v), 116 to 133 (110v), 111 to 121 (100v)
Undervoltage correction Voltage boost of 14% applies when input is
95 to 108 (120v), 87 to 99 (110v), 83 to 90 (100v)
LED Indicators Status LEDs indicate line power, battery power, AVR,
overload and replace battery status - with a 3-LED level
meter for load and battery charge level
Site wiring fault indication Rear panel site wiring fault LED
Alarms Audible alarm indicates power failure and overload conditions
Alarm cancel operation Power-fail alarm can be silenced using alarm-cancel switch
Switches 2 Switches control off/on power status and
alarm-cancel/self-test operation; rear panel
protected switches support nominal voltage selection
UPS AC suppression joule rating 690
UPS AC suppression response time Instantaneous
UPS Dataline suppression 1 line TEL/DSL (1 in / 1 out); 10/100Base T Ethernet
EMI / RFI AC noise suppression Yes
Installation form factors supported
with included accessories
Primary form factor Tower
UPS / Power Module dimensions
in primary form factor
(height x width x depth / inches)
10.2 x 6.8 x 13.2
UPS / Power Module dimensions
in primary form factor
(height x width x depth / cm)
26 x 17.1 x 33.7
UPS / Power Module weight (lbs) 45
UPS / Power Module weight (kg) 20.4
UPS Shipping dimensions
(height x width x depth / inches)
14 x 9.8 x 18.5
UPS Shipping dimensions
(height x width x depth / cm)
35.6 x 24.8 x 47
Shipping weight (lbs) 49.2
Shipping weight (kg) 22.3
Cooling method Fan
UPS housing material Steel
Operating Temperature Range +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius
Storage Temperature Range +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius
Relative Humidity 0 to 95%, non-condensing
AC mode BTU / hr. (full load) 161.1
Battery mode BTU / hr. (full load) 498.1
AC mode efficiency rating (100% load) 95%
Audible Noise Audible Noise < 50 dBA at Front Side 1 Meter
Communications interface USB; DB9 Serial; Slot for SNMP/Web interface
Network monitoring port description Supports detailed monitoring of UPS and site power conditions
PowerAlert software Included
Communications cable USB and DB9 cabling included
WatchDog compatibility Supports Watchdog application, OS and
hard-reboot restart options for remote applications
Transfer time 4-6 milliseconds
Low voltage transfer to battery power (setpoint) 95V (120V), 87V (110V), 83V (100V)
High voltage transfer to battery power (setpoint) 145V (120V), 133V (110V), 121V (100V)
Cold Start (startup in battery
mode during a power failure)
Cold-start operation supported
High availability UPS features Hot swappable batteries
Green & high efficiency features Greater than 95% efficiency - GREEN UPS
UPS Certifications Tested to UL1778 (USA); Tested to CSA (Canada);
Tested to NOM (Mexico); Meets FCC Part 15 Category A (EMI)
Product Warranty Period (Worldwide) 2-year warranty, 3 year with registration.
Note: Registration is required for 3-year warranty.
Connected Equipment Insurance
(U.S., Canada & Puerto Rico)
$250,000 Ultimate Lifetime Insurance

Specs Overview

Detailed Specs