Tripp Lite UPS Maintenance Bypass Panel For Tripp Lite SV100KL and SV120KL 3-Phase UPS Systems - 3 Breakers - Bypass Switch - AC 120/208 V - 3-phase WYE (star) - SU120KMBPK

• Features 3 built-in circuit breakers to isolate loads
  Three circuit breakers - an AC input breaker, a maintenance bypass breaker and a maintenance isolation breaker - are connected to heavy-duty bus work and isolate the UPS system from its connected load with no loss of network availability. This allows the load to remain continuously powered without costly downtime.
• Switching between normal and bypass modes is easy
  When a UPS needs maintenance, this UPS bypass panel keeps power supplied to components via its mechanical interlock system by switching power to the external bypass breaker. Simply unscrew the interlock switch, rotate the switch from the UPS AC input breaker to the bypass breaker, then turn on the bypass breaker and turn off the UPS and isolation breaker to perform UPS maintenance without service interruption.
• Convenient wall-mount installation
  Made of galvanized steel, the service bypass panel has rear mounting holes for installation on a smooth, solid wall.

This wall-mount three-breaker maintenance bypass panel is compatible with Tripp Lite's SV100KL and SV120KL 3-phase UPS systems. It allows you to reroute power around the UPS, providing an alternate path for electricity that keeps the connected load operational while the UPS is offline for maintenance or repairs.
Three circuit breakers - an AC input breaker, a maintenance bypass breaker and a maintenance isolation breaker - are connected to heavy-duty buswork and isolate the UPS system from its connected load with no loss of network availability. This allows the load to remain continuously powered without costly downtime. A Kirk-key interlock system enhances safety and security. Removable handles allow the panel's trim cover to be removed for internal access. The 400A unit has a kAIC rating of 10K.
When a UPS needs maintenance, this UPS bypass panel keeps power supplied to components via its mechanical interlock system by switching power to the external bypass breaker. Simply unscrew the interlock switch, rotate the switch from the UPS AC input breaker (SW1) to the bypass breaker (SW2), then turn on the bypass breaker and turn off the UPS and isolation breaker (SW3) to perform UPS maintenance without service interruption.
Made of galvanized steel, the service bypass panel has rear mounting holes for installation on a smooth, solid wall (mounting hardware not included).